|
Home
Agricultural
Trailers
Automotive
Trailers
Construction
Trailers
Enclosed
Trailers
Military/Gov't
Trailers
Sporting
Trailers
Utility & Lawn
Care Trailers
|
Welcome to Ja-Mar Mfg/GSA
Contract Number GS-07F-5756P
| Below are some pictures and information on our line of off road type trailers and front racks. |
SA610TL
|
Multi Purpose Utility Trailer
Unique design allows this trailer to be towed behind a Humvee or Gator type vehicle. The one piece removable tongue simply plugs into the A-frame tilt mechanism to offer a 24 in. pintle ring height or simply reverse it for a 12 in. pintle ring height. Standard inside bed dimensions are 6 ft. 3 in. wide x 10 ft. long x 12 in. tall sides, all steel construction, tilt type platform, 9 gauge mesh flooring, 16 in. on center crossmembers, inside tie down rings, fold up jack, lubrication fittings on all spring and pivot attachment points, e-z lube axle spindles, tilt retaining pins secured by lanyard, safety chains, OD Green or Desert Sand colors, 3500# GVWR will easily haul any ATV, Gator type vehicle, lawn mower, supplies, etc., at highways speeds. Longer lengths, taller sides, and ball type coupler available through options.
|
(click image for larger version)
SA610TL
Standard
|
SA610TL
Tilted
|
SA610TL
Hitch in lower position to be
pulled by Gator or other ATV
(12" hitch height)
|
SA610TL
Hitch in high position to be
pulled by Humvee
(24" hitch height)
|
SA610TL
Shown with optional 2' sides
lined with mesh and rear gate
|
SA610TL
Shown with optional rear gate
and 2' sides lined with mesh
|
SA610TL
Shown with optional 1' extra
length and rear gate
|
SA610TL
Standard tires on right
optional width tires on left
|
SA610TL
Load position
|
SA610TL
Loaded
|
SA610TL
With optional 2' sides lined
with mesh and rear gate
|
SA610TL
With optional 2' sides lined
with mesh and rear gate
|
(click image for larger version)
SA408TL
|
Multi Purpose Utility Trailer
Designed to be pulled by Gator type vehicles to haul ATV's, motorcycles, mowers, supplies, etc. Can also be pulled behind civilian type vehicles at highway speeds. All steel construction, tilt capable with standard inside bed dimensions of 4 ft. wide x 8 ft. long x 10.5 in. tall sides, 2000# GVWR. Comes standard with removable pintle eye tongue, inside tie down rings, lubrication fittings on all springs and pivot attachment points, e-z lube axle spindles, 13 in. tires and choice of OD Green or Desert Sand colors. Longer lengths, wider width, taller sides, and ball type couplers available through options.
|
(click image for larger version)
SA408TL
Standard
|
SA408TL
Tilted
|
SA408TL
Hitch
|
(click image for larger version)
G2X5R
|
Direct bolt on front rack for Gator with Side Brush Guards. 22 in. x 5 ft. 200 lb. capacity. Flat black color.
|
(click image for larger version)
G2X5R
Bolt on front rack for JD Gator
|
G2X5R
Bolt on front rack for JD Gator
|
G2X5R
Bolt on front rack for JD Gator
|
(click image for larger version)
Typical load of trailers
|
Tires and wheels must be
removed for shipping
|
NOTE: All Ja-Mar Mfg, Inc. trailers have Federal USDOT required new tires and wheels.
|
